Backup On IBM LTO4 800/1600

September 26, 2013, 9:05 pm

≫ Next: BE 2010 Not removing VMWARE snapshots from VCenter

≪ Previous: Backup Exec 2012 - Transfer License to a New Server

$

0

0

I need a solution

Backup On IBM LTO4 800/1600

Dear Forum,

Need solution, Our cutomer using Symantec Backup Exec 2012 and they have backup on IBM LTO4, they have problem cannot backup to LTO4, is there any link or guide to configuring this, or they have miss configure of this setting. see problem details bellow,

Problem is as follows:
1. Backup data can not be more than 800GB Error "cartridge full" error when I use IBM LTO4 cartridge uncompressing 800GB / 1600GB with compress the data, before my migration to Symantec backup, NTBackup Win Server 2003 R2 support more than 900GB backup
2. Symantec backup can not read the backup file be created by NTBackup so I'm very difficult to restore the data be created by NTBackup for Installation Symantec Backup automatically disable the function of NTBackup and service "removable storage"
3. We detail the following Server
- The main server as the main server DRCILW16 installed Symantec Backup Exec 2012 and IBM LTO 4 tape backup
- Symantec Agent is installed on the server DRCILW17
- Both servers are using OS Win server 2003 R2

  Waiting soon for the Solution, and thanks before.

 

Regards

Joe

 

 

                                     

---

BE 2010 Not removing VMWARE snapshots from VCenter

September 26, 2013, 11:12 pm

≫ Next: Backup Disk to Disk to Disk

≪ Previous: Backup On IBM LTO4 800/1600

$

0

0

I need a solution

Hi there, As the title states, we can see on the VCenter server that BE2010 is not removing the snapshots of the VM's after it has completed a backup, providing some backups do fail at times and some are a good run, however the backlog is becoming big and taking allot of storage space.

 

Please advise on some simple steps to check to ensure that BE2010 is infact removing the snapshots or "ghost" snapshots from the Vcenter

 

We are running W2K8 R2 with BE2010 SP3

Backup Disk to Disk to Disk

September 27, 2013, 12:08 am

≫ Next: BE 2010 R3 unable to browse the folder in RHL server.

≪ Previous: BE 2010 Not removing VMWARE snapshots from VCenter

$

0

0

I need a solution

Hello,

Just wondering if its possible to do a "disk to disk to disk" backup scenario?

What i want to do is have a decidated backup server with a large internal hard drive array, perform an intial backup over night to that, and then once it completes do another backup to an external hard drive.

I know this can kinda be done already by have two backup jobs.

Job 1. Backup the server to the backup server

Job 2. Backup the backup server data to USB Drives

But that means i've essentially backing up backed up data... if that makes sense.

What i almost want to do is a simple copy from the backup server to the USB drives...but i would like that to be done all through backup exec (without the use of scripts preferably.

Cheers

Peter Sheridan

BE 2010 R3 unable to browse the folder in RHL server.

September 27, 2013, 12:18 am

≫ Next: Hi TEam,Could please someone

≪ Previous: Backup Disk to Disk to Disk

$

0

0

I need a solution

Hi,

We have the following infra.

Backup Exec 2010 R2 on Windows 2003 Ent. SP2 (32bit). As Master and Media server

RALUS of BE 2010 R3 installed on RHEL 5.4 64 Bit. As BE Client

We have installed the RALUS of BE 2010 R3 on the RHEL and its was successful. We have started the VRTUS** service in /etc/init.d

Restarted the backup service in the BE 2010 R2 server.

When we are trying to browse after adding the Linux server IP in the "User defined" section... I am getting the user authentication window to choose the user from.

I am giving the root user with correct password but still the authentication window  is poping up.

 

I have added the IP address and host name in the hots file in both the servers (linux and windows ).

Just to add this BE 2010 R3 server's IP address have changed but the host name remained the same.

And I am giving the host name in the RALUS configuration.

 

Thanks.

 

 

 

 

Hi TEam,Could please someone

November 15, 2013, 1:17 am

≫ Next: Symantec Backup V-Ray edition

≪ Previous: BE 2010 R3 unable to browse the folder in RHL server.

$

0

0

No

I need a solution

Hi TEam,

Could please someone help me to sort this issue out. We bought a Dell Server with Windows server 2012 and also bought a tape library along with it and have bought the Symantec Backup exec, nOw the Symantec backup exec doesnt get installed on the windows Server 2012, Please let me know the other options for me.

9445461

Symantec Backup V-Ray edition

November 15, 2013, 2:29 am

≫ Next: Catalog Folder issue on Backup Exec

≪ Previous: Hi TEam,Could please someone

$

0

0

I need a solution

Hi,

 

Have just purchased the license and dowmloaded the software. Not really shure what's the best practise in installing the product.

We have a Windows server 2012 HOST with 4 virtuall machines at the moment (will be about 15 soon).

Some questions:

- Where should we install the software? On the HOST.

- Can we backup to a network NAS (share)?

- We have a backup server (2008 std) which are running Symantec Bakup Exec 2012 for backup of data. Can we use the same server?

Any answere would be most appreciated.

Regards,

 

Geir Tore

1384521644

Catalog Folder issue on Backup Exec

November 15, 2013, 3:22 am

≫ Next: Bei SDR Restore wird HDD nicht ürber Adaptec Controller erkannt

≪ Previous: Symantec Backup V-Ray edition

$

0

0

I need a solution

Team,

Symantec Backup Exec 2010 R3

Windows 2008

All of sudden I started receiving the below alerts and backups failed in my environment, “an error was encountered writing to the on-disk catalogs”

So I have created a new catalog folder with the help of the article

 “http://www.symantec.com/business/support/index?page=content&id=TECH53393”

All backups were running successfully and the alerts also stopped,  But now my problem is when I go to restore tab I could not see the old backups.

 

What is the solution to view all the backup in the restore windows??????

Bei SDR Restore wird HDD nicht ürber Adaptec Controller erkannt

November 15, 2013, 6:20 am

≫ Next: Getting Exception in the backup job

≪ Previous: Catalog Folder issue on Backup Exec

$

0

0

I need a solution

Hallo,

hab hier ein Problem, bei dem nicht weiterkomme.

Ich versuche hier gerade eine SDR ( Backup Exec 2012 ) Wiederherstellung auf einen Baugleichen Server mit einem Adaptec Raid Controller 6405.

Der Controller wird mit SDR Boot CD erkannt, aber nicht das Raid was eingerichtet ist und wohin auch wieder hergestellt werden soll.

Hat jemand eine Idee ?

 

---

Getting Exception in the backup job

November 15, 2013, 7:21 am

≫ Next: Upgrading agent from 12.5 to 2012 is hangining on "Validating install"

≪ Previous: Bei SDR Restore wird HDD nicht ürber Adaptec Controller erkannt

$

0

0

I need a solution

Hi, 

 

I have a Windows Server 2008 R2 where I have installed Backup Exec 2010 R3 SP3, I am backing up two virtual machines, hosted in Hyper-V 2008.

 

One Virtual machine is Windows 2012 Server standard and the other is windows 2008 R2

 

The exception I get is "Unable to collect necessary metadata to perform GRT level restore"

 

Any idea on why this has occured and how to solve this would be much helpful...

 

Thanks,

Ram

Upgrading agent from 12.5 to 2012 is hangining on "Validating install"

November 15, 2013, 12:49 pm

≫ Next: Unable to perform a restore from tape

≪ Previous: Getting Exception in the backup job

$

0

0

I need a solution

I ended up following symantecs document to manually remove the 12.5 agent from my 2003 std server. I rebooted and now I'm trying to get the 2012 agent to install which is completing but keeps getting hung up at the end.

It just sits there on "Validating Install" with msiexec.exe eating up 50% forever, I finally just have to kill the service. Has anyone run into this or have any ideas?  Thanks.

 

Symantec Backup Exec (TM) 2012 Agent for Windows Installation Log

11-15-2013,15:28:45 : EnumProcesses Counts: 49

11-15-2013,15:28:45 : Windows Operating System Version: 5.2

11-15-2013,15:28:47 : Checking for .Net Framework 2.0 SP 2.

11-15-2013,15:28:47 : Checking for .Net Framework 2.0 SP 2.

11-15-2013,15:28:47 : Executing managed _Setup:

11-15-2013,15:28:47 : \\192.168.111.8\d$\_Network & Server Info\Software\BackupExec Agent 2012 x86 11-13-13\VxPushRA\RAWS32\install\_Setup.exe

11-15-2013,15:28:48 : Loading XML from:

11-15-2013,15:28:48 : \\192.168.111.8\d$\_Network & Server Info\Software\BackupExec Agent 2012 x86 11-13-13\VxPushRA\RAWS32\install\IFProducts.xml

11-15-2013,15:28:48 : ArgsDataParser::InitDictionary

11-15-2013,15:28:48 : AgentSeqDlgs::RawsDlgSequence

11-15-2013,15:28:48 : Set RAWS Media path: \\192.168.111.8\d$\_Network & Server Info\Software\BackupExec Agent 2012 x86 11-13-13\VxPushRA\RAWS32\install\media\

11-15-2013,15:28:48 : RawsDlgSequence::CheckInstMode

11-15-2013,15:28:48 : BEOperations::BE_GetInstalledProdCodeVersion()

11-15-2013,15:28:48 : Starting initialization of install data.

11-15-2013,15:28:48 : Completed initialization of install data.

11-15-2013,15:28:48 : BEOperations::BE_GetInstalledProdCodeVersion()

11-15-2013,15:28:49 : BEOperations::BE_GetInstalledProdCodeVersion()

11-15-2013,15:28:49 : Terminal Services enabled.

11-15-2013,15:28:49 : Terminal Services is in Application Server mode. Changing Terminal Services server to Install mode.

11-15-2013,15:28:49 : Terminal Services server has been set to Install mode.

11-15-2013,15:28:49 : Launching UI Install

11-15-2013,15:28:49 : Running in Installation mode

11-15-2013,15:28:49 : AgentSeqDlgs::ADlgWelcome

11-15-2013,15:28:49 : AgentSeqDlgs::ADlgInstallType

11-15-2013,15:28:49 : RawsDlgSequence::CheckInstalledProducts

11-15-2013,15:28:49 : BEOperations::BE_GetInstalledProdCodeVersion()

11-15-2013,15:28:49 : BEOperations::BE_GetInstalledProdCodeVersion()

11-15-2013,15:28:49 : AgentSeqDlgs::DlgChooseCustom

11-15-2013,15:28:49 : AgentSeqDlgs::ADlgPublishRemoteSrv

11-15-2013,15:28:49 : AgentSeqDlgs::AdlgInstallComplete

11-15-2013,15:28:49 : AgentSeqDlgs::Misc_BE_CommonOps

11-15-2013,15:28:58 : Local Install Agent

11-15-2013,15:29:00 : INFO -2146233087: Unable to determine if Windows Deduplication volume.

11-15-2013,15:29:00 : AgentSeqDlgs::ReadAdvertiseListKey

11-15-2013,15:32:58 : AgentSeqDlgs::ReadAdvertiseListKey

11-15-2013,15:32:58 : tiiny4.tiinettech.com;

11-15-2013,15:33:00 : AgentSeqDlgs::AgentInstaller

11-15-2013,15:33:00 : Starting Install

11-15-2013,15:33:01 : In GetVMWareGuest().

11-15-2013,15:33:01 : RAWS MSI Command Line: EXE_ENVOKED=1 ALLUSERS=1 REBOOT=ReallySuppress INSTALLDIR="C:\Program Files\Symantec\Backup Exec\RAWS" INSTALLLEVEL=200 ADDLOCAL=ALL TRANSFORMS="C:\Documents and Settings\All Users\Application Data\Symantec\Backup Exec\{BF38D61B-B739-4170-84C5-05F3DA650447}\1033.MST" RAWSADVRTISENAMELIST=tiiny4.tiinettech.com; ENABLEADVRT=1 PATCH="\\192.168.111.8\d$\_Network & Server Info\Software\BackupExec Agent 2012 x86 11-13-13\VxPushRA\RAWS32\Updates\RAWS321798RHF209149.msp;\\192.168.111.8\d$\_Network & Server Info\Software\BackupExec Agent 2012 x86 11-13-13\VxPushRA\RAWS32\Updates\RAWS321798RSP2.msp;" REINSTALLMODE=emus VMWAREGUEST = 0 INSTALLUIMODE=1

11-15-2013,15:33:01 : Running Install Mode

11-15-2013,15:33:01 : AgentInstaller::Install_Product_Thread

11-15-2013,15:33:01 : Launching MSI: \\192.168.111.8\d$\_Network & Server Info\Software\BackupExec Agent 2012 x86 11-13-13\VxPushRA\RAWS32\install\media\Symantec Backup Exec Remote Agent for Windows Systems.msi

11-15-2013,15:33:01 : Discovered Total Actions: 131

11-15-2013,15:33:04 : === Logging started: 11/15/2013 15:33:04 ===

11-15-2013,15:33:04 : Action 15:33:04: INSTALL.

11-15-2013,15:33:04 : Action start 15:33:04: INSTALL.

11-15-2013,15:33:04 : Action 15:33:04: WindowsFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C.

11-15-2013,15:33:04 : Action start 15:33:04: WindowsFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C.

11-15-2013,15:33:04 : Action ended 15:33:04: WindowsFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C. Return value 1.

11-15-2013,15:33:04 : Action 15:33:04: SystemFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C.

11-15-2013,15:33:04 : Action start 15:33:04: SystemFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C.

11-15-2013,15:33:04 : Action ended 15:33:04: SystemFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C. Return value 1.

11-15-2013,15:33:04 : Action 15:33:04: WindowsFolder.66332652_9C28_58B1_FF1F_C8B3B9A1E18E.

11-15-2013,15:33:04 : Action start 15:33:04: WindowsFolder.66332652_9C28_58B1_FF1F_C8B3B9A1E18E.

11-15-2013,15:33:04 : Action ended 15:33:04: WindowsFolder.66332652_9C28_58B1_FF1F_C8B3B9A1E18E. Return value 1.

11-15-2013,15:33:04 : Action 15:33:04: SystemFolder.66332652_9C28_58B1_FF1F_C8B3B9A1E18E.

11-15-2013,15:33:04 : Action start 15:33:04: SystemFolder.66332652_9C28_58B1_FF1F_C8B3B9A1E18E.

11-15-2013,15:33:04 : Action ended 15:33:04: SystemFolder.66332652_9C28_58B1_FF1F_C8B3B9A1E18E. Return value 1.

11-15-2013,15:33:04 : Action 15:33:04: WindowsFolder.D2730D3F_3C41_5884_FF1F_C8B3B9A1E18E.

11-15-2013,15:33:04 : Action start 15:33:04: WindowsFolder.D2730D3F_3C41_5884_FF1F_C8B3B9A1E18E.

11-15-2013,15:33:04 : Action ended 15:33:04: WindowsFolder.D2730D3F_3C41_5884_FF1F_C8B3B9A1E18E. Return value 1.

11-15-2013,15:33:04 : Action 15:33:04: SystemFolder.D2730D3F_3C41_5884_FF1F_C8B3B9A1E18E.

11-15-2013,15:33:04 : Action start 15:33:04: SystemFolder.D2730D3F_3C41_5884_FF1F_C8B3B9A1E18E.

11-15-2013,15:33:04 : Action ended 15:33:04: SystemFolder.D2730D3F_3C41_5884_FF1F_C8B3B9A1E18E. Return value 1.

11-15-2013,15:33:04 : Action 15:33:04: WindowsFolder.68B7C6D9_1DF2_54C1_FF1F_C8B3B9A1E18E.

11-15-2013,15:33:04 : Action start 15:33:04: WindowsFolder.68B7C6D9_1DF2_54C1_FF1F_C8B3B9A1E18E.

11-15-2013,15:33:04 : Action ended 15:33:04: WindowsFolder.68B7C6D9_1DF2_54C1_FF1F_C8B3B9A1E18E. Return value 1.

11-15-2013,15:33:04 : Action 15:33:04: SystemFolder.68B7C6D9_1DF2_54C1_FF1F_C8B3B9A1E18E.

11-15-2013,15:33:04 : Action start 15:33:04: SystemFolder.68B7C6D9_1DF2_54C1_FF1F_C8B3B9A1E18E.

11-15-2013,15:33:04 : Action ended 15:33:04: SystemFolder.68B7C6D9_1DF2_54C1_FF1F_C8B3B9A1E18E. Return value 1.

11-15-2013,15:33:04 : Action 15:33:04: WindowsFolder.63E949F6_03BC_5C40_FF1F_C8B3B9A1E18E.

11-15-2013,15:33:04 : Action start 15:33:04: WindowsFolder.63E949F6_03BC_5C40_FF1F_C8B3B9A1E18E.

11-15-2013,15:33:04 : Action ended 15:33:04: WindowsFolder.63E949F6_03BC_5C40_FF1F_C8B3B9A1E18E. Return value 1.

11-15-2013,15:33:04 : Action 15:33:04: SystemFolder.63E949F6_03BC_5C40_FF1F_C8B3B9A1E18E.

11-15-2013,15:33:04 : Action start 15:33:04: SystemFolder.63E949F6_03BC_5C40_FF1F_C8B3B9A1E18E.

11-15-2013,15:33:04 : Action ended 15:33:04: SystemFolder.63E949F6_03BC_5C40_FF1F_C8B3B9A1E18E. Return value 1.

11-15-2013,15:33:04 : Action 15:33:04: WindowsFolder.97F81AF1_0E47_DC99_FF1F_C8B3B9A1E18E.

11-15-2013,15:33:04 : Action start 15:33:04: WindowsFolder.97F81AF1_0E47_DC99_FF1F_C8B3B9A1E18E.

11-15-2013,15:33:04 : Action ended 15:33:04: WindowsFolder.97F81AF1_0E47_DC99_FF1F_C8B3B9A1E18E. Return value 1.

11-15-2013,15:33:04 : Action 15:33:04: SystemFolder.97F81AF1_0E47_DC99_FF1F_C8B3B9A1E18E.

11-15-2013,15:33:04 : Action start 15:33:04: SystemFolder.97F81AF1_0E47_DC99_FF1F_C8B3B9A1E18E.

11-15-2013,15:33:04 : Action ended 15:33:04: SystemFolder.97F81AF1_0E47_DC99_FF1F_C8B3B9A1E18E. Return value 1.

11-15-2013,15:33:04 : Action 15:33:04: WindowsFolder.74FD3CE6_2A8D_0E9C_FF1F_C8B3B9A1E18E.

11-15-2013,15:33:04 : Action start 15:33:04: WindowsFolder.74FD3CE6_2A8D_0E9C_FF1F_C8B3B9A1E18E.

11-15-2013,15:33:04 : Action ended 15:33:04: WindowsFolder.74FD3CE6_2A8D_0E9C_FF1F_C8B3B9A1E18E. Return value 1.

11-15-2013,15:33:04 : Action 15:33:04: SystemFolder.74FD3CE6_2A8D_0E9C_FF1F_C8B3B9A1E18E.

11-15-2013,15:33:04 : Action start 15:33:04: SystemFolder.74FD3CE6_2A8D_0E9C_FF1F_C8B3B9A1E18E.

11-15-2013,15:33:04 : Action ended 15:33:04: SystemFolder.74FD3CE6_2A8D_0E9C_FF1F_C8B3B9A1E18E. Return value 1.

11-15-2013,15:33:04 : Action 15:33:04: WindowsFolder.9BAE13A2_E7AF_D6C3_FF1F_C8B3B9A1E18E.

11-15-2013,15:33:04 : Action start 15:33:04: WindowsFolder.9BAE13A2_E7AF_D6C3_FF1F_C8B3B9A1E18E.

11-15-2013,15:33:04 : Action ended 15:33:04: WindowsFolder.9BAE13A2_E7AF_D6C3_FF1F_C8B3B9A1E18E. Return value 1.

11-15-2013,15:33:04 : Action 15:33:04: SystemFolder.9BAE13A2_E7AF_D6C3_FF1F_C8B3B9A1E18E.

11-15-2013,15:33:04 : Action start 15:33:04: SystemFolder.9BAE13A2_E7AF_D6C3_FF1F_C8B3B9A1E18E.

11-15-2013,15:33:04 : Action ended 15:33:04: SystemFolder.9BAE13A2_E7AF_D6C3_FF1F_C8B3B9A1E18E. Return value 1.

11-15-2013,15:33:04 : Action 15:33:04: WindowsFolder.98CB24AD_52FB_DB5F_FF1F_C8B3B9A1E18E.

11-15-2013,15:33:04 : Action start 15:33:04: WindowsFolder.98CB24AD_52FB_DB5F_FF1F_C8B3B9A1E18E.

11-15-2013,15:33:04 : Action ended 15:33:04: WindowsFolder.98CB24AD_52FB_DB5F_FF1F_C8B3B9A1E18E. Return value 1.

11-15-2013,15:33:04 : Action 15:33:04: SystemFolder.98CB24AD_52FB_DB5F_FF1F_C8B3B9A1E18E.

11-15-2013,15:33:04 : Action start 15:33:04: SystemFolder.98CB24AD_52FB_DB5F_FF1F_C8B3B9A1E18E.

11-15-2013,15:33:04 : Action ended 15:33:04: SystemFolder.98CB24AD_52FB_DB5F_FF1F_C8B3B9A1E18E. Return value 1.

11-15-2013,15:33:04 : Action 15:33:04: TempFolder.B770ADD8_4203_438F_955A_9AABAD839036.

11-15-2013,15:33:04 : Action start 15:33:04: TempFolder.B770ADD8_4203_438F_955A_9AABAD839036.

11-15-2013,15:33:04 : Action ended 15:33:04: TempFolder.B770ADD8_4203_438F_955A_9AABAD839036. Return value 1.

11-15-2013,15:33:04 : Action 15:33:04: WindowsFolder.B770ADD8_4203_438F_955A_9AABAD839036.

11-15-2013,15:33:04 : Action start 15:33:04: WindowsFolder.B770ADD8_4203_438F_955A_9AABAD839036.

11-15-2013,15:33:04 : Action ended 15:33:04: WindowsFolder.B770ADD8_4203_438F_955A_9AABAD839036. Return value 1.

11-15-2013,15:33:04 : Action 15:33:04: SystemFolder.129FBFBE_1090_4497_84AD_42F3A6BA36B4.

11-15-2013,15:33:04 : Action start 15:33:04: SystemFolder.129FBFBE_1090_4497_84AD_42F3A6BA36B4.

11-15-2013,15:33:04 : Action ended 15:33:04: SystemFolder.129FBFBE_1090_4497_84AD_42F3A6BA36B4. Return value 1.

11-15-2013,15:33:04 : Action 15:33:04: ProgramMenuFolder.464186A9_1AEE_4341_A4A4_4FFF20793441.

11-15-2013,15:33:04 : Action start 15:33:04: ProgramMenuFolder.464186A9_1AEE_4341_A4A4_4FFF20793441.

11-15-2013,15:33:04 : Action ended 15:33:04: ProgramMenuFolder.464186A9_1AEE_4341_A4A4_4FFF20793441. Return value 1.

11-15-2013,15:33:04 : Action 15:33:04: SystemFolder.F88E2ED2_926E_463B_AB36_CB01D1A37315.

11-15-2013,15:33:04 : Action start 15:33:04: SystemFolder.F88E2ED2_926E_463B_AB36_CB01D1A37315.

11-15-2013,15:33:04 : Action ended 15:33:04: SystemFolder.F88E2ED2_926E_463B_AB36_CB01D1A37315. Return value 1.

11-15-2013,15:33:04 : Action 15:33:04: SetWindowsFolder.464186A9_1AEE_4341_A4A4_4FFF20793441.

11-15-2013,15:33:04 : Action start 15:33:04: SetWindowsFolder.464186A9_1AEE_4341_A4A4_4FFF20793441.

11-15-2013,15:33:04 : Action ended 15:33:04: SetWindowsFolder.464186A9_1AEE_4341_A4A4_4FFF20793441. Return value 1.

11-15-2013,15:33:04 : Action 15:33:04: AppSearch. Searching for installed applications

11-15-2013,15:33:04 : Action start 15:33:04: AppSearch.

11-15-2013,15:33:04 : Property: REMOVEAOFOFOLDER.129FBFBE_1090_4497_84AD_42F3A6BA36B4, Signature: VspCache.129FBFBE_1090_4497_84AD_42F3A6BA36B4

11-15-2013,15:33:04 : Action ended 15:33:04: AppSearch. Return value 1.

11-15-2013,15:33:04 : Action 15:33:04: LaunchConditions. Evaluating launch conditions

11-15-2013,15:33:04 : Action start 15:33:04: LaunchConditions.

11-15-2013,15:33:04 : Action ended 15:33:04: LaunchConditions. Return value 1.

11-15-2013,15:33:04 : Action 15:33:04: FindRelatedProducts. Searching for related applications

11-15-2013,15:33:04 : Action start 15:33:04: FindRelatedProducts.

11-15-2013,15:33:04 : Action ended 15:33:04: FindRelatedProducts. Return value 1.

11-15-2013,15:33:04 : Action 15:33:04: ValidateProductID.

11-15-2013,15:33:04 : Action start 15:33:04: ValidateProductID.

11-15-2013,15:33:04 : Action ended 15:33:04: ValidateProductID. Return value 1.

11-15-2013,15:33:04 : Action 15:33:04: setUserProfileNT.

11-15-2013,15:33:04 : Action start 15:33:04: setUserProfileNT.

11-15-2013,15:33:04 : Action ended 15:33:04: setUserProfileNT. Return value 1.

11-15-2013,15:33:04 : Action 15:33:04: setAllUsersProfile2K.

11-15-2013,15:33:04 : Action start 15:33:04: setAllUsersProfile2K.

11-15-2013,15:33:04 : Action ended 15:33:04: setAllUsersProfile2K. Return value 1.

11-15-2013,15:33:04 : Action 15:33:04: RAWS_SetVSPUPGRADE.

11-15-2013,15:33:04 : Action start 15:33:04: RAWS_SetVSPUPGRADE.

11-15-2013,15:33:11 : Action ended 15:33:11: RAWS_SetVSPUPGRADE. Return value 1.

11-15-2013,15:33:11 : Action 15:33:11: CA_WindowsFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C.

11-15-2013,15:33:11 : Action start 15:33:11: CA_WindowsFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C.

11-15-2013,15:33:11 : Action ended 15:33:11: CA_WindowsFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C. Return value 1.

11-15-2013,15:33:11 : Action 15:33:11: CA_SystemFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C.

11-15-2013,15:33:11 : Action start 15:33:11: CA_SystemFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C.

11-15-2013,15:33:11 : Action ended 15:33:11: CA_SystemFolder_x86_VC.DF495DFD_79F6_34DF_BB1E_E58DB5BDCF2C. Return value 1.

11-15-2013,15:33:11 : Action 15:33:11: CostInitialize. Computing space requirements

11-15-2013,15:33:11 : Action start 15:33:11: CostInitialize.

11-15-2013,15:33:11 : Action ended 15:33:11: CostInitialize. Return value 1.

11-15-2013,15:33:11 : Action 15:33:11: AddPDDEIFSServiceToMsi.F88E2ED2_926E_463B_AB36_CB01D1A37315.

11-15-2013,15:33:11 : Action start 15:33:11: AddPDDEIFSServiceToMsi.F88E2ED2_926E_463B_AB36_CB01D1A37315.

11-15-2013,15:33:12 : Action ended 15:33:12: AddPDDEIFSServiceToMsi.F88E2ED2_926E_463B_AB36_CB01D1A37315. Return value 1.

11-15-2013,15:33:12 : Action 15:33:12: Set_ALLUSERS.

11-15-2013,15:33:12 : Action start 15:33:12: Set_ALLUSERS.

11-15-2013,15:33:12 : Action ended 15:33:12: Set_ALLUSERS. Return value 1.

11-15-2013,15:33:12 : Action 15:33:12: ResolveSource.

11-15-2013,15:33:12 : Action start 15:33:12: ResolveSource.

11-15-2013,15:33:12 : Action ended 15:33:12: ResolveSource. Return value 1.

11-15-2013,15:33:12 : Action 15:33:12: RAWS_SetVMwareProps.

11-15-2013,15:33:12 : Action start 15:33:12: RAWS_SetVMwareProps.

11-15-2013,15:33:18 : RAWS_SetVMwareScripts

11-15-2013,15:33:18 : Action ended 15:33:18: RAWS_SetVMwareProps. Return value 1.

11-15-2013,15:33:18 : Action 15:33:18: FileCost. Computing space requirements

11-15-2013,15:33:18 : Action start 15:33:18: FileCost.

11-15-2013,15:33:18 : Action ended 15:33:18: FileCost. Return value 1.

11-15-2013,15:33:18 : Action 15:33:18: IsolateComponents.

11-15-2013,15:33:18 : Action start 15:33:18: IsolateComponents.

11-15-2013,15:33:18 : Action ended 15:33:18: IsolateComponents. Return value 1.

11-15-2013,15:33:18 : Action 15:33:18: CostFinalize. Computing space requirements

11-15-2013,15:33:18 : Action start 15:33:18: CostFinalize.

11-15-2013,15:33:18 : Action ended 15:33:18: CostFinalize. Return value 1.

11-15-2013,15:33:18 : Action 15:33:18: SetODBCFolders. Initializing ODBC directories

11-15-2013,15:33:18 : Action start 15:33:18: SetODBCFolders.

11-15-2013,15:33:18 : Action ended 15:33:18: SetODBCFolders. Return value 1.

11-15-2013,15:33:18 : Action 15:33:18: MigrateFeatureStates. Migrating feature states from related applications

11-15-2013,15:33:18 : Action start 15:33:18: MigrateFeatureStates.

11-15-2013,15:33:18 : Action ended 15:33:18: MigrateFeatureStates. Return value 0.

11-15-2013,15:33:18 : Action 15:33:18: InstallValidate. Validating install

11-15-2013,15:33:18 : Action start 15:33:18: InstallValidate.

11-15-2013,15:33:20 : Action ended 15:33:20: InstallValidate. Return value 1.

11-15-2013,15:33:20 : Action 15:33:20: InstallInitialize.

11-15-2013,15:33:20 : Action start 15:33:20: InstallInitialize.

11-15-2013,15:40:53 : The return code from the MSI is: 1601

11-15-2013,15:40:53 : AgentSeqDlgs::PostInstallActions

11-15-2013,15:40:53 : Cleaning up the symc status key

11-15-2013,15:40:53 : The return value for Symantec Backup Exec Agent for Windows returned error code: 1601

11-15-2013,15:40:53 : Clean up Symantec installer keys.

11-15-2013,15:40:55 : AgentSeqDlgs::Misc_BE_CommonOps

11-15-2013,15:40:55 : Dialog Sequence Returning errorlevel 1601

+ 11-15-2013,15:40:55 : The Installation Failed!

1384616969

Unable to perform a restore from tape

November 15, 2013, 1:16 pm

≫ Next: problem with CASO and MMS

≪ Previous: Upgrading agent from 12.5 to 2012 is hangining on "Validating install"

$

0

0

I need a solution

Hello forum,

 

I hope someone may be able to shed some advice on this situation. I have a client that currently has Backup Exec 2010 R2 (without the new SP) that needs to retain old tape backups for retention policy purposes. We are currently attempting to recatalog tapes as the environment that Backup Exec previously managed has changed. 

When attempting to catalog a tape, it appears that BE services drop, and the job goes into a recovered status. Inventory jobs appear to complete successfully though. 

If I want to perform a test restore from tape, the process, from what I understand, is:

1. Inventory the device
2. Catalog the media 
3. Insert additional media if requested
4. Perform restore

Is there a step that is being skipped? Any idea why services always drop in the middle of a job?

 

Thanks in advance,

Jordan

problem with CASO and MMS

November 16, 2013, 3:07 am

≫ Next: Tape library sharing between NetApp NAS and media server

≪ Previous: Unable to perform a restore from tape

$

0

0

I need a solution

Hi all,

I have a problem created with one of the BE support that is he deleted the MMS from the CAS server consol without disabling the communication between the CAS and the MMS which caused the MMS not to be controlled by the CAS any more and no link between them

I tried to repair both CAS and MMS with no success and also tried to manage MMS locally and then revert back to centralised also no success.

 

I think the problem with the BEDB itself but unfortunately I don't have any backup or dump for it

I have this event ID 33152 shown continuesly on CAS server

Adamm Database Event: Handle Failure!
Error = ERROR_INVALID_HANDLE
Server = "CESUDB04"
Active Node = ""
Instance = ""
Database = "BEDB"
Connection String = "DRIVER=SQL Server;SERVER=CESUDB04;DATABASE=BEDB;App=BEWS PVL"

 

This is urgent issue and your fast response is highly appreciated.

 

Thanks

Tape library sharing between NetApp NAS and media server

November 16, 2013, 8:11 am

≫ Next: job activity not working properly

≪ Previous: problem with CASO and MMS

$

0

0

I need a solution

I am working on a backup topology design. The customer has one NetApp SAN/NAS with FC tape out port, and one HP MSL tape library with two FC LTO5 drives. They will have a BE 2010 or BE 2012 media server with FC port, and several Hyper-V with FC ports. All FC ports connects to the SAN switch.

The question is that is it possible to use one tape library to backup NAS using NDMP, as well backup those Hyper-V LAN-free? If yes, what license do they need? I know if using NBU, they just  need a SSO. How about for BE? Any difference if use BE 2010 or BE 2012?

Thanks,

Henry

job activity not working properly

November 16, 2013, 3:29 pm

≫ Next: Robotic library drives shows as standalone tape drives

≪ Previous: Tape library sharing between NetApp NAS and media server

$

0

0

I need a solution

Hi,

I am having a strange behaviour in BE2012 where the job activity page does not show anything but the backup duplicate to tape is running on the background?

I can see the job rate: and the bytes going up but everything else seem to be missing?

Any ideas?

Thanks,

 

Robotic library drives shows as standalone tape drives

November 18, 2013, 1:03 am

≫ Next: BE 2012 Hyper-V any script to shutdown and start the VM ?

≪ Previous: job activity not working properly

$

0

0

I need a solution

Hello

 

We are using BE2012 and we have netapp.

 

2 different library connected to directly on netapp

1 tape library connected to switch which is directly pointing to BE2012 server.

 

The tape drive shows as stanalone for one of the library connected on netapp.

 

Please suggest after reviewing the screenshot and at this moment the library which directly pointing to BE2012 server is disconnected and then we have take the screenshot.

• 3.JPG
• setup.jpg

---

BE 2012 Hyper-V any script to shutdown and start the VM ?

November 18, 2013, 1:29 am

≫ Next: Files in System32 and Winsxs folders not backing up

≪ Previous: Robotic library drives shows as standalone tape drives

$

0

0

I need a solution

hi guys,

 

i need to perform a cold backup of my Hyper-V 2012 VM's. any working script how to shutdown the vm before backup and bring it up after backup ? 

 

thank you for any suggestions ! 

 

 

 

Files in System32 and Winsxs folders not backing up

November 18, 2013, 3:05 am

≫ Next: V-Ray edition and installation on HyperV HOST

≪ Previous: BE 2012 Hyper-V any script to shutdown and start the VM ?

$

0

0

I need a solution

Hello everyone,

I have recently installed Backup Exec (BE) 2010 R3 on a server that is running Windows Server 2008 R2 Standard x64, we also have another server running BE 2010 R3. The older server is very old and slow and is there just as a spare in case of hardware failure, however, we did used to use it as our main backup server.

Since I started running backups on the new server I found that the backups are smaller than they were when compared to the old backups. I have investigated this and found that the bulk of the files that make up this difference are in the System32 and Winsxs folders. I have compared the amount of data backed up on the new backup job with the amount that was being backed up on the old server and it varies from server to server, but the difference between the backup sizes can be around 20gb.

In a way this is good as it is saving me time on my backups, but I am little concerned as to why BE is doing this, plus I am a little concerned that if it comes to doing a restore that I may not be able to do so properly. As far as I can see every single option on the backup job on the new installation is exactly the same as the old one, so I am not too sure why there is a difference! 

Can anyone explain to me why BE is doing this, and also, is it a problem, should I be concerned about it?

V-Ray edition and installation on HyperV HOST

November 18, 2013, 5:43 am

≫ Next: Very long restore

≪ Previous: Files in System32 and Winsxs folders not backing up

$

0

0

I need a solution

Hi,

 

I have just imported the V-Ray licenses into my Backup Exec 2012 media server. I have installed the VHD Mounter since it's a Windows 2008 std server.

How can I continue the installation? I don't see any HyperV agents anywhere....

Attached are a file with all the licensed products for this media server.

Hope anyone can guide me in this for I can't see any changes on the media server after intalling the license file that was shipped when we bought the product.

Regards,

Geir Tore

• Symantec_licenses_hed.jpg

Very long restore

November 18, 2013, 5:56 am

≫ Next: Bare metal restore with Oracle client

≪ Previous: V-Ray edition and installation on HyperV HOST

$

0

0

I need a solution

Hello,

 

 

I am using Backup Exec 12.5 with backup to disk as media. When I start a restore of data from a fileserver the job starts and states in the Job Setup the media required to complete the restore. But when I look at the devices tab it seems that Backup Exec goes through all the Media files (4 GB in size) from the first one indicated to be required until the last one indicated to be required.

 

When restoring data for another server, using another "device" (backup to disk location) which also has multiple media files does not seem to scan all the media files, but only the ones required.

 

Kind regards

Bas

Bare metal restore with Oracle client

November 18, 2013, 6:20 am

≫ Next: Duplicate job entered in Recovered status and nothing else happend

≪ Previous: Very long restore

$

0

0

I need a solution

We are currently testing our backup strategy with Symantec and so far so good.

Since last week I have been trying to do a bare metal restore of an oracle server. this is what I did so far:

• Convert original machine to Virtual machine Point in Time.
• Rename server + assign new IP + new SID
• remove oracle broken database instance (oradim -delete)
• Create new instance with same SID (oradim -new)
• generate new password file (orapwd file=path\pwdsid.ora password=<password>)
• change DBID to the original (rman: SETDBID<dbid ID>)
• Reconfigure backup exec agent utility, restore trust, reconfigure oracle instance and database access.
• Add 'new' virtual server to backup exec interface and configure password
• create restore job in old 'broken' server that uses last available control file.
• restore to a different Oracle server, with the server name, correct log on account and database log on account.

when I execute this job i get the RMAN error:

RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/18/2013 14:47:45 ORA-27191: sbtinfo2 returned an error

 

when I enable server side debugging this is the last entry i see in my log:

BENGINE:  [11/18/13 14:47:55] [9512]     2013-11-18T14:47:54.725 [engapi]             - Record                    - 7
BENGINE:  [11/18/13 14:47:55] [9512]     2013-11-18T14:47:54.725 [engapi]             -    resource               - Oracle-Win::\\mlinetstsvr02-vm.itnet.hosp\mlineTEST
BENGINE:  [11/18/13 14:47:55] [9512]     2013-11-18T14:47:54.726 [engapi]             -    account name           -
BENGINE:  [11/18/13 14:47:55] [9512]     2013-11-18T14:47:54.726 [engapi]             -    account ID             - 00000000-0000-0000-0000-000000000000
BENGINE:  [11/18/13 14:47:55] [9512]     2013-11-18T14:47:54.726 [engapi]             -    resource ID            - 00000000-0000-0000-0000-000000000000
BENGINE:  [11/18/13 14:47:55] [9512]     2013-11-18T14:47:54.726 [engapi]             -    resource Container ID  - 00000000-0000-0000-0000-000000000000
BENGINE:  [11/18/13 14:47:55] [9512]     2013-11-18T14:47:54.726 [engapi]             -    server                 - mlinetstsvr02-vm.itnet.hosp
BENGINE:  [11/18/13 14:47:55] [9512]     2013-11-18T14:47:54.726 [engapi]             -    server ID              - 00000000-0000-0000-0000-000000000000
BENGINE:  [11/18/13 14:47:55] [9512]     2013-11-18T14:47:54.726 [engapi]             -    resource OS ID         - 39
BENGINE:  [11/18/13 14:47:55] [9512]     2013-11-18T14:47:54.726 [engapi]             -    resource OS Ver        - 0
BENGINE:  [11/18/13 14:47:55] [9512]     2013-11-18T14:47:54.726 [engapi]             -    resource Type          - 14
BENGINE:  [11/18/13 14:47:55] [9512]     2013-11-18T14:47:54.726 [engapi]             -    resource Sub Type      - 2
BENGINE:  [11/18/13 14:47:55] [9512]     2013-11-18T14:47:54.726 [engapi]             -    flags                  - 0x5
BENGINE:  [11/18/13 14:47:55] [9512]     2013-11-18T14:47:54.726 [engapi]             -    update date time       - 11/18/2013 1:47:07 PM
BENGINE:  [11/18/13 14:47:55] [9512]     2013-11-18T14:47:54.726 [engapi]             -    No password Found
BENGINE:  [11/18/13 14:47:55] [9512]     2013-11-18T14:47:54.726 [engapi]             - *****************************************************************
BENGINE:  [11/18/13 14:47:55] [9512]     2013-11-18T14:47:54.726 [server]             - Removing 'MLINETSTSVR02.itnet.hosp Restore 00060' from status update list
BENGINE:  [11/18/13 14:47:55] [9512]     2013-11-18T14:47:54.726 [server]             - Updating status for: 'MLINETSTSVR02.itnet.hosp Restore 00060' (0x18 0x0)
BENGINE:  [11/18/13 14:47:55] [9512]     2013-11-18T14:47:54.727 [server]             - Status for: 'MLINETSTSVR02.itnet.hosp Restore 00060' updated
BENGINE:  [11/18/13 14:47:55] [9512]     2013-11-18T14:47:54.730 [server]             - Merging of BE / VSR Job Logs not necessary for this Type of Job
BENGINE:  [11/18/13 14:47:55] [9512]     2013-11-18T14:47:54.730 [server]             - EndJob() criticalVolumeError - 0x0
BENGINE:  [11/18/13 14:47:55] [9512]     2013-11-18T14:47:54.730 [server]             - Ending job 'MLINETSTSVR02.itnet.hosp Restore 00060' with error status (-536870080)

 

to clarify, mlinetstsvr02 is the original server that is broken. mlinetstsvr02-vm is the new machine.

Does anybody have any idea how I can resolve this? Or is there a good step by step guide to do this?
I used the administrators guide but this is not that clear imho.